Swing Roller

Introduction

Don't just roll!

Although designed to cope with the higher workloads of larger farms, the Swing Roller is still easy to handle and simple to fold whilst being capable of covering many acres in a day.

The rings are also mounted on 60mm axles with 4 bolt bearings. The two outside wing sections are supported by deep wing link folding mechanisms with an additional jump slot for increased floatation and for working field edges.

The clever design of all HE-VA Rolls ensures that tractor drawbar height variation (400-600mm) does not alter the performance of the Rolls.

Features

Weight Transfer System

Cambridge Rolls without HE-VA automatic weight balancing tend to exert the highest ground pressure on the centre roller section. This roller section carries the weight of the drawbar, wheel frame and hydraulics as well as its own weight, far more than the four wing sections.

With a basic roller set up there is no weight transfer and the uneven weight distribution is great as can be seen above.

Even with a basic sprung weight transfer system the hinges at either end of the centre section prevent weight being spread evenly.

The HE-VA SAT system is spring loaded and as the outside roll sections are attached with centre pivot hinges, weight transferred evenly across the full width of the Cambridge Rolls.

Contour Following

The key to any set of Rolls successfully improving soil consolidation is weight and getting the weight on to the soil. The Swing-Roller achieves this by featuring Seven Pivot Points, five centre pivots plus two more where the outer and inner wing sections join. Giving independent floatation on each section; this allows the roller to follow the contours on the most undulating of ground conditions and ensures constant ring to soil contact.

 

Heavy Duty Design

The Swing Rollers folding mechanism has a deep wing link pivot with Teflon coated steel bushing top and bottom to provide strength for cultivation as well as rolling.

The rings are mounted on 60mm axles for strength and long life. These axles run on 4 bolt bearings protected inside u-profile steel.

 

   

Fold in Seconds

Simple, safe folding - what else do you expect from a HE-VA

Folding Sequence 5 Section Swing Roller


Rolls in transport position, wheels down.
 
Swinging the wing section out.
 
The wing section swung out.
 
Wheel ram cylinder engaged - wheels lifted forward and up.
 
Outside wing cylinder extending.
 
Rolls ready to work.
Transport & Storage

A locking pin secures each wing for transport on the 5 section swing rollers.

In the completely folded position the weight of the wings is carried between the tractor and transport wheels improving stability.

      

 

Models

12.2m 5 section Swing Roller
RING TYPE                             Cambridge (2D) Only (Standard)   Cambridge & Breaker (Standard) Cambridge Only (Aggressive)  Cambridge & Breaker (Aggressive)  Crosskill  Crosskill 
WIDTH   Ring Size 500mm 600mm 510mm 620mm 500mm  600mm 510mm  620mm 485/530mm  550/600mm 
WORKING
12.2m
TRANSPORT
2.7m
WEIGHT KG
RINGS
AXLE (mm
5460
125
60
N/A
N/A
N/A
6680
235
60
N/A
N/A
N/A
5035
125
60
N/A
N/A
N/A
5730
235
60
N/A
N/A
N/A
5300
125
60
N/A
N/A
N/A
WHEELS: 400 / 60 X 15.5 - 14 PLY

Technical Information

Swing Roller - Cambridge Rolls 12.2m

HE-VA HD 5 section Agricultural Rolls - 500mm Roller Rings

Model

Roller Size

Working Width -m

Working Width -ft

Transport Width -m

Weight kg

1063098-50

500mm

12.2m

40'

2.7m

5460

HE-VA HD 5 section Agricultural Rolls - 510mm Roller Rings

Model

Roller Size

Working Width -m

Working Width -ft

Transport Width -m

Weight kg

1063098-51

510mm

12.2m

40'

2.7m

6680

NOTE: 12.2m Machines fitted with pivoting towing eye Ø50mm - 66630757017

Included: Road Lights as Standard

Pricing

HE-VA October 2017 Product Price List

To download the HE-VA product price list click the image above

 

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Ring Profile

Ring Profile
 
 3 Spoke Standard
Cambridge 500mm

3 Spoke Standard
Cambridge & Breaker 
510mm/21”

2 Piece Crosskill

 

HE-VA Rolls are available with a choice of ring types. All carefully designed to cope with today’s higher machine weights but retain the time-proven qualities of traditional ring engineering, the range includes new developments created to meet customer demand and changing farming methods.

Draw Bar Options

Draw Bar Options

Pivoting Towing Eye - Standard

 

Weight (KG)

Description

Pivoting towing eye - standard

66630757028

13

Pivoting towing eye "Standard" Ø50mm mounted with M16 bolts

Pivoting Towing Eye - Strong

 

Weight (KG)

Description

66630757017

20

Pivoting towing eye "Strong" Ø50mm mounted with M20 bolts

Pivoting Towing Eye - High Quality

 

Weight (KG)

Description

66630757046

20

Pivoting towing eye "High Quality" Ø50mm mounted with M20 bolts

Pivoting Towing Eye - Strong 85°

 

Weight (KG)

Description

66630757041

20

Pivoting towing eye "Strong 85°" Ø50mm mounted with M20 bolts

Ball Hitch

 

Weight (KG)

Description

66630757023

26

Ball hitch f/Ø80mm ball mounted with M20 bolts

Pivoting Crossbar Cat III

 

Weight (KG)

Description

66630757034

81

Lower link mounted pivoting crossbar Cat III Ø36.5mm pins mounted with M20 bolts

Pivoting Crossbar Cat IV

 

Weight (KG)

Description

66630757045

88

Lower link mounted pivoting crossbar Cat IV Ø50mm pins mounted with M20 bolts

Towing Eye Bush

 

Weight (KG)

Description

 

660438132

0.3

Bush for towing eye Ø50mm / Ø33.5mm reduces from Ø50mm to Ø33.5mm

NOTE: To upgrade the drawbar on your trailed HE-VA machine, please ensure the change is clearly marked on your order.

Downloads

Gallery

Would you like some more information?